The MR7-01M-3MT Resuscitation Monitor is designed to continuously track the physiological state of a patient in an intensive care/resuscitation unit.
for civil purposes
This monitor samples, processes and displays, in a graphical or digital form,
- Blood pressure: systolic, diastolic or mean (in a non-invasive mode);
- Heart rates;
- Arterial blood saturation with oxygen SpO2.
Blood pressure can be measured in either a semi-automatic or a fully automatic mode with the sampling period set anywhere between 1 and 90 min and (if required) with a pre-specified number of points to be sampled.
One-time measurements are performed at any time in a semi-automatic mode.
Sound and light alarms are available for all measurable quantities except for the mean blood pressure.
The reflective photoplethysmographic (PPG) transducer can be attached to any point of the patient’s body to monitor peripheral and/or central circulation.
The monitor’s non-volatile memory can store all settings and trends over the last 10 hours of the monitor’s operation in case of power outage.
A standard RS-232 interface is provided to connect the monitor to a PC for transmission of main quantities as well as PPGs, pulsing wave amplitudes, cardiac cycles time lengths and any of the two types of deviation (i.e., the ratio of two adjacent values).
Monitor dimensions: 260 x 220 x 110 mm.
Weight: max. 2 kg.
Required power: 220 V/50 Hz (optionally: from an onboard power distribution network or from batteries).
This model can also be used as a building block for configuring a multi-station resuscitation monitoring system with each patient’s data fed into the central work station.
The monitor is available as either a separate article or complete with the KFZ-EMPD-01-ZMT-Khrunichev intensive care bed.
TU 9441-001-42837290-99, Registration Certificate No. 29/08030699/00524-00
|
