Greases
AEROSHELL GREASE 6
Application field:
"AeroShell Grease 6" is a general purpose grease composed of a mineral oil thickened with Microgel, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability.
The useful operating range is -40°С to +121°С.
Conform to the specifications: MIL-PRF-24139A, DEF STAN 91-12, DCSEA 382/A, XG-271.
AEROSHELL GREASE 7
Application field:
"AeroShell Grease 7" is an advanced multi-purpose grease, composed of a synthetic oil thickened with Microgel, possessing good load carrying ability over a wide temperature range. It is inhibited agains corrosion and has excellent resistance to water.
AeroShell Grease 7 satisfies nearly all the tha airframe grease requirements of turbine engined aircraft and also those of piston engined aircraft provided that seal incompatibility does not occur.
The useful operating range is -73°С to +149°С.
Conform to the specifications: MIL-PRF-23827C,DCSEA 354/A.
AEROSHELL GREASE 14
Application field:
"AeroShell Grease 14" is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidation and corrosion inhibited. AeroShell Grease 14 is a particularly suitable for the lubrication of helicopter main and tail rotor bearings, splines, etc.
Conform to the specifications: MIL-G-25537C, DEF STAN 91-51,XG-284.
AEROSHELL GREASE 15
Application field:
”AeroShell Grease 15” is an extreme temperature range grease, composed of silicone oil with organic thickener. AeroShell Grease 15 is inhibited against corrosion and oxidation, and possesses excellent high temperature and mechanical stability properties and low evaporation rate.
Recomended for use in lightly loaded ball and roller bearings.
Conform to the specifications: MIL-G-25013E, DEF STAN 91-55, XG-300.
AEROSHELL GREASE 22
Application field:
"AeroShell Grease 22" is especially recommended for use wherever severe operating conditions are encountered as in high bearing loads, high speeds, wide operating temperature range, and particularly were long grease retention and high resistance to water washout are required.
The wide range of applications include aircraft wheel bearing, engine accesoires, control systems, actuators, screw-jacks, servo mechanisms and electric motors, helicopters, rotor bearings, instruments, airframe lubrication, hinge pins, static joints, landing gears.
May be used as analogue of Russian greases CIATIM-201, CIATIM-203, CIATIM-221, VNII NP-207, ERA (VNII NP-268M) and NK-50.
Conform to the specifications: MIL-PRF-81322F, DOD-G-24508A, DEF STAN 91-52 and others.
AEROSHELL GREASE 33
Application field:
”AeroShell Grease 33” is a synthetic universal airframe grease with corrosion and oxidation inhibitors and load carrying additives.
”AeroShell Grease 33” can be used for routine lubrication on aircraft manufactured by Boeing, McDonnell, Douglas, Airbus, Bae Regional Aircraft, Canadair, Lockheed, Embraer, Fokker and Gulfstream.
Conform to the specifications: MIL-PRF-23827C, BMS 3-33 and others.
|
|